Quartz vs. Granite Countertops: Cost, Care and Which to Pick
Quartz vs. Granite Countertops: Cost, Care and Which to Pick

Choose quartz if you want a uniform look and no sealing. Choose granite if you want one-of-a-kind natural stone and don’t mind a sealer every so often. Both are tough enough for a busy kitchen, and the price gap is smaller than most people expect. Which one is right depends on how you cook, how much upkeep you will accept, and what pattern you want to see every morning. Quartzite, a third natural option that often gets mixed up with quartz, is covered below too.
TL;DR
- Quartz is engineered: crushed quartz plus resin. It is non-porous, never needs sealing, and looks the same slab to slab.
- Granite is natural stone. Every slab is different, it handles heat well, and it may need periodic sealing depending on the color and slab.
- Cost overlaps heavily. Installed prices run roughly $40 to $100 per square foot for typical granite and $50 to $150 for quartz, so the specific slab matters more than the category.
- Quartzite is a natural stone with marble-like veining, harder than granite, but it usually costs more and needs sealing.
- Pick slabs in person, then see them in your own kitchen layout before anything is ordered.
Table of Contents
- What each material actually is
- Quartz vs. granite at a glance
- Cost: what you will really pay
- Durability and everyday performance
- Heat resistance
- Sealing, cleaning and upkeep
- Looks: uniform or one of a kind
- Where quartzite fits
- Which one for which household
- Match the countertop to the cabinets and the layout
- How to choose: a simple process
- Perspective: why we draw the counter on screen first
- See your counters before you buy them
- FAQ
- Sources
What each material actually is
The names sound alike, but the materials are made in very different ways.
Granite is a natural stone made of quartz, feldspar and mica, formed over millions of years deep underground. It is quarried as large rocks and cut into slabs, then polished. There is no binder in it.
Quartz is an engineered stone. Slabs are made from 90 to 94% ground natural quartz crystals and 6 to 10% polymer resins and pigments, compacted under vacuum, cured and then polished. Because the recipe is controlled, color and pattern are consistent.
Quartzite is natural too, but it is a different rock from granite. It forms when quartz-rich sandstone is recrystallized by heat and pressure into a dense, interlocking mass. It is not the same thing as engineered quartz, and the similar names are the source of a lot of showroom confusion. If a label just says “quartz,” ask whether it is the engineered product or the natural stone.
Quartz vs. granite at a glance
| Factor | Quartz (engineered) | Granite (natural) |
|---|---|---|
| Look | Uniform, predictable, many patterns including marble-style veining | Unique slab to slab, natural flecks and swirls |
| Sealing | Never required | Depends on the slab; some need it periodically |
| Heat | Resin can scorch above about 300°F, so use trivets | Handles heat well, though trivets are still advised |
| Stains | Non-porous, very stain resistant | Resists staining well when properly sealed |
| Chipping | Can chip at the edge under a hard hit | Can chip at the edge under a hard hit |
| Seams | Larger slabs mean fewer seams | Smaller average slab, so more seams on big runs |
| Typical installed cost | $50 to $150 per sq ft | $40 to $100 per sq ft (exotics higher) |
| Outdoors | Not recommended | Suitable |
The sections below explain each row.
Cost: what you will really pay

Nationally in 2026, installed granite typically costs $40 to $100 per square foot, with exotic slabs running $100 to $200 or more, while engineered quartz runs $50 to $150. Quartzite sits higher, at $70 to $200 or more. Those are national figures. The same source notes that prices run 20 to 40% higher in high-cost metros, so treat them as a starting range and not a Sacramento quote.
Two details help you read any estimate:
- Fabrication and installation run roughly $25 to $50 per square foot whatever the stone, so most of the gap between materials comes from the slab itself.
- Granite is priced by rarity and pattern, not by performance. A $45 granite performs the same as a $150 one. You pay more for a rare color, not for a tougher counter.
What moves the number on your own job:
- Slab choice. Entry-level granite and entry-level quartz can land at nearly the same price. Brand-name quartz and exotic granite sit at the top.
- Edge profile. A simple eased edge costs less than a layered or mitered edge.
- Cutouts. Sinks, cooktops and faucet holes all add fabrication time.
- Layout. An island with waterfall sides uses more stone and takes more skill than a single straight run.
- Seams and vein matching. Matching a dramatic pattern across a seam adds labor.
For a 40-square-foot countertop area, a $10 to $30 per square foot difference between mid-range slabs works out to a few hundred to roughly a thousand dollars. That is real money, but it is small next to a full kitchen budget. Cabinets, labor and appliances drive the total far more. We can help you put a real number on your own kitchen, and we explain how below.
Durability and everyday performance
Both materials do well in independent testing. Consumer Reports found that quartz survived spills, hot pots and knives with top scores and doesn’t need sealing, while granite also earned top scores but needs periodic sealing for stain protection.
On scratches and wear, the gap is slim. In their earlier head-to-head, neither material showed much wear after 25 strokes of 100-grit sandpaper. Their project leader also noted that both are rock, so hitting an edge hard enough with a heavy weight can chip either one. In practice, the weak spot on both is the edge near the sink or dishwasher, where pots tend to get knocked.
The takeaway: you are not choosing between a durable counter and a fragile one. You are choosing between two durable counters that behave differently under heat, stains and upkeep.
Heat resistance
This is the one place the two materials genuinely differ.
Granite is a natural stone formed under heat, and the Natural Stone Institute says it is typically heat resistant to about 480°F. It also cautions against applying a localized heat source directly, because sharp temperature differences can start a crack. Use trivets with it anyway.
Quartz contains resin. Care guidance says it can scorch or discolor above about 300°F, so a pan straight off a burner or a hot roasting tray should go on a trivet. Consumer Reports’ test at 400°F with a weighted pan of hot shortening left no marks on either material, but that was a short, controlled test. Everyday habits matter more. If you set pans straight onto the counter without thinking, granite is more forgiving. If you use trivets, the difference disappears.

The Natural Stone Institute recommends trivets or mats on all stone countertops, so it is a good habit whichever you choose.
Sealing, cleaning and upkeep
Quartz is non-porous. No sealer, no special products. Warm water and mild soap do the job.
Granite is where the answer gets nuanced. The Natural Stone Institute says most granite countertops do not need to be sealed, and a quality sealer should last ten to fifteen years. It also notes that many granite species get a factory resin treatment that fills micro-fissures. Other care guides recommend sealing every one to three years depending on porosity and color, with light colors needing it more often than dark, dense ones. The reasonable middle ground: ask your fabricator how your specific slab should be treated, and do a simple water-drop test now and then. If water darkens the stone and doesn’t bead, it is time to reseal.
For daily cleaning of granite, use warm water, mild dish soap and a soft cloth. Avoid acidic products: the Institute notes that lemon, vinegar and similar acids can dull or etch some stones. It also warns that rust removers containing hydrofluoric acid attack all stones, granite and quartzite included.
Looks: uniform or one of a kind
This is usually what decides it.
Granite offers thousands of color variations and no two slabs match. You get natural flecks, striations and movement. If you love that character, you will want to see the exact slab, not a sample, before it is cut.
Quartz gives you control. A pattern looks the same from slab to slab, which makes it easy to match across a big kitchen or between a kitchen and a bath. Manufacturers also produce marble-like veining, solid whites and soft concretes that granite cannot offer.
Slab size matters for seams too. An average granite slab is about 105 by 54 inches, while a standard quartz slab is 120 by 55 and a jumbo quartz slab is 129 by 65. On a long run or a large island, quartz can mean fewer seams.
If you are also weighing a solid-surface material as another option, this Corian versus quartz comparison covers the trade-offs between an engineered quartz surface and another manufactured material.
Where quartzite fits
Many people searching granite versus quartzite want the look of marble without marble’s softness. Quartzite delivers it.
- Hardness: quartzite rates about 7 on the Mohs scale versus granite’s 6 to 7, so a knife blade will dull before it scratches quartzite.
- Heat: both handle a hot pan well, though trivets remain smart.
- Look: granite is speckled and granular. Quartzite usually shows veining in whites, creams and soft earth tones.
- Sealing: both are porous natural stones that need periodic sealing. The same guide puts granite at every one to three years and quartzite at every 6 to 24 months, depending on the slab.
- Cost: quartzite generally costs more, and its hardness adds to fabrication cost. The stonify cost guide puts that at 15 to 25% extra.
If you choose quartzite, buy a slab your fabricator knows well, seal it before you use the kitchen, and wipe up oils, wine and turmeric promptly. Dense slabs sold as quartzite vary in how porous they are, so have the installer test yours.
Which one for which household
Choose quartz if:
- You want the least upkeep and don’t want to think about sealing.
- You need a consistent pattern across a large kitchen or a matching bath.
- You want a pure white, a concrete look or a very specific veining.
- You want fewer seams on a long island.
Choose granite if:
- You love natural variation and want to select the exact slab.
- You often put hot cookware down quickly.
- You prefer a natural material. The Institute describes granite as a counter that will outlast most of our lifetimes, a good argument for the long-term homeowner.
- You care about indoor air quality. Engineered quartz resins can emit VOCs, while granite will not.
Choose quartzite if:
- Visual impact is the priority and the budget allows for it.
- You are comfortable with a sealing routine.
One placement note: engineered quartz is not appropriate for outdoor use, so for an outdoor kitchen, choose a natural stone.
Match the countertop to the cabinets and the layout
A countertop never works alone. The slab you love has to suit the cabinet color, the backsplash, the flooring and the way the room is used.
A few practical pairings we see homeowners ask about:
- Busy, patterned granite looks best with simple, quiet cabinet fronts and a plain backsplash.
- Subtle quartz can support a bolder cabinet color or a detailed tile.
- Veined quartzite or marble-look quartz pairs well with painted cabinets and brushed hardware.
Cabinet construction affects the counter too. Whether you choose framed or frameless cabinets changes the overhang and seam placement. Corner cabinets deserve a look at this stage as well. A lazy susan gives easy access to a corner and suits round, rotating storage, while a blind corner with pull-out trays can use the space more fully. Both change where seams fall and how the stone is cut, which is one more reason to settle cabinets and counters together.
If flooring is changing too, our hardwood comparison helps you decide that part before the colors are locked in.
How to choose: a simple process
- Decide your upkeep tolerance. If “no sealing, ever” matters to you, quartz wins by default.
- Set a per-square-foot range using the figures above, then ask for slab-specific, installed quotes.
- Visit a slab yard. Look at full slabs under daylight, not just samples. Natural stone in particular varies.
- Test the pairing. Put the slab next to your actual cabinet door, tile and flooring.
- Ask about the fabrication. Edge profile, seam locations and cutouts should be agreed before cutting starts.
- Ask how your slab should be cared for. Get the sealer recommendation in writing if the stone needs one.
The hardest step is number four. Small samples rarely tell you how a whole kitchen will read, which is where design software helps.
Perspective: why we draw the counter on screen first
We have installed and supplied enough kitchens to know that no one regrets choosing between quartz and granite as much as they regret choosing without seeing the whole room.
That is why our process starts with measuring your home and building it to scale in 3D. We render your real selections photorealistically, so you see the counter, cabinets, floor and backsplash together before anything is ordered. If the veining feels too busy or the white is too cold, changing it on screen costs nothing.
Our view is that the material matters less than the design around it: where the seams fall, how the edge meets the cabinets, and whether the layout fits how your family cooks. Because one team designs, sources and builds the job, those decisions stay connected instead of being split between a showroom, a project manager and an installer.
We would rather you pick the right slab on the first try. Bring your samples and your Pinterest boards, and we will show you how they look together.
Connor Cline
See your counters before you buy them
If you are weighing slabs for a kitchen or bath, our team designs the whole room with you, builds it in 3D to scale, and renders your real selections before ordering. We handle design, sourcing and the build with one accountable team across Greater Sacramento. Start with our kitchen remodeling page, or contact us through our site for a consultation and a real number for your kitchen.

Want to see finished spaces first? Browse our remodeling gallery, or look at how we approach custom cabinetry, which pairs with whichever countertop you choose.
FAQ
Is quartz or granite better for a kitchen?
Neither is better across the board. Quartz is lower maintenance and uniform, with no sealing. Granite offers natural variation and handles heat better. Both earned top scores in Consumer Reports’ testing, so choose on look, upkeep and budget.
Is quartz cheaper than granite?
Not always. Nationally, typical installed granite runs about $40 to $100 per square foot and quartz about $50 to $150, according to the stonify cost guide. Entry-level versions of both can cost nearly the same. Edge, cutouts and layout also change the total.
Does granite need to be sealed?
Sometimes. The Natural Stone Institute says most granite countertops do not need sealing, though some light or porous slabs benefit from it. Ask your fabricator about your slab and test it with a few drops of water.
Can you put a hot pan on quartz?
It is safer not to. The resin in quartz can scorch or discolor above about 300°F, so use a trivet. Granite tolerates more heat, but a trivet is still a good habit for every stone.
What is the difference between quartzite and granite?
Quartzite forms from recrystallized sandstone and is slightly harder, with marble-like veining. Granite is an igneous rock with a speckled look. Both are natural, both usually need sealing at some interval, and quartzite typically costs more.
Sources
- Granite vs. Quartz: Choosing Between Two Popular Countertops (Bob Vila)
- Breton Method Explained: How Engineered Quartz Is Made (SlabWise)
- The Science of Stone: What Countertops Are Made Of
- Countertop cost by material: 2026 prices (Stonify)
- Best Countertop Buying Guide (Consumer Reports)
- Quartz vs. Granite: Better Countertop Material? (Consumer Reports)
- Natural Stone Institute: What Is Granite?
- Natural Stone Institute: Sealing Natural Stone Countertops
- Natural Stone Institute: Cleaning Products for Natural Stone
- Countertop Care & Maintenance Guide (SlabWise)
- Quartzite vs Granite Countertops (SlabWise)
- Natural Stone, Quartz, Tile: Uses, Care, Creation (ARC Surfaces)
- Corian or quartz kitchen countertop comparison