Skip to content
← All articles

Porcelain vs. Ceramic Tile: Which Fits Your Kitchen or Bath?

Porcelain vs. Ceramic Tile: Which Fits Your Kitchen or Bath?

Porcelain floor tile meets ceramic bathroom wall tile

Porcelain is a type of ceramic tile that is denser and absorbs almost no water, so it is the safer pick for showers, bathroom floors, kitchen floors and any spot that sees heavy use. Standard ceramic is lighter, easier to cut and often cheaper, which makes it a good fit for walls and kitchen backsplashes. The right choice depends on where the tile goes, and on how the room is laid out around it. That is why we pick tile during the design stage, on screen, rather than in a showroom aisle.

Cali Craft Renovations
See Your Tile Choices in 3D
Cali Craft designs kitchens and baths to scale, rendering your real tile selections so you can see how they work together before ordering.
Visit

TL;DR

  • Porcelain is ceramic tile that absorbs 0.5% of its weight in water or less. Standard ceramic absorbs more.
  • Choose porcelain for shower floors, bathroom floors, kitchen floors and anything outdoors. Choose ceramic for walls and backsplashes.
  • Expect porcelain to cost more per square foot and to cost more to install, because it is harder to cut.
  • On a kitchen floor, tile handles spills and heavy traffic, while hardwood adds warmth. Both can work, depending on the room.
  • Tile and grout choices look very different once rendered together, so see them in 3D before you order.

Table of Contents

What actually separates porcelain from ceramic

Porcelain is not a different category from ceramic. It is a variant of it. Under the industry standard ANSI A137.1, porcelain tile is defined by water absorption of 0.5% or less, and that absorption is measured with a lab method called ASTM C373. In plain terms: weigh a tile dry, soak it, weigh it again. If it gained half a percent or less, it counts as porcelain.

That low number comes from how the tile is made. Porcelain is fired at higher temperatures than ceramic, which makes it denser, harder and less porous. Consumer Reports describes porcelain as denser and less porous than standard ceramic and usable on floors, walls and backsplashes.

What that means day to day:

  • Moisture. Less water gets in, so porcelain is the natural candidate for showers and floors that get wet.
  • Durability. Density gives porcelain its edge for heavy foot traffic. Ceramic is best used indoors, while porcelain works indoors and outdoors.
  • Cutting. The same hardness that makes porcelain tough makes it harder to cut and shape, which shows up in labor.

How to tell which one you have (or which one you’re looking at)

The two can look nearly identical. The Spruce notes that packaging and product certification are more reliable identifiers than a visual check. When you are comparing samples, look at the spec sheet or the box for:

  1. The water absorption figure. 0.5% or lower is porcelain.
  2. A porcelain certification mark. The Spruce describes the PTCA mark as identifying porcelain tile that meets the 0.5% threshold.
  3. The intended use. Tile rated for floors, showers or exterior use is usually porcelain. Tile labeled for walls only is usually standard ceramic.

The absorption number is simple to understand. Home Depot’s tile guide explains it as the percentage of the tile’s own weight in water that it will take on. A lower number means less moisture in the tile.

Porcelain vs. ceramic at a glance

Ceramic Porcelain
Water absorption Higher than 0.5% 0.5% or less
Firing and density Fired at lower temperatures, less dense Fired at higher temperatures, denser
Best locations Walls, backsplashes, lighter-traffic floors Floors, showers, high-traffic areas, outdoors
Cutting Easier, basic tile saw Often needs a wet saw or specialty tools
Typical material price Lower Often higher, though ranges overlap
Looks Wide range of colors and glazes Can imitate concrete, wood and stone

Sources for the table: the ANSI definition, Consumer Reports, The Spruce and Fine Homebuilding.

Both types share the traits that make tile popular. They resist wear, moisture, scratches, dents and stains. Both can crack under a hard impact, and both are hard enough that a dropped dish will usually lose.

What each one costs

Porcelain is often the pricier of the two, but the ranges overlap, so a premium ceramic can cost more than a basic porcelain. The Spruce lists roughly $5 to $10 per square foot for ceramic and $10 to $15 for porcelain. Consumer Reports’ flooring guide lists $6 to $15 per square foot across the ceramic and porcelain tile it covers. Those are material prices only. They do not include setting materials, grout, waterproofing or labor.

What moves the price of a given tile:

  • Where it was made and how well. The Spruce points to origin and design quality as price drivers.
  • The tile’s class and absorption rating. A tile built for floors is made differently from one built for walls.
  • Size and finish. Large-format tile and textured or stone-look finishes usually cost more per square foot than a plain glazed square.
  • Installation. Porcelain may cost more to install, since it is harder to cut and set.

A worked example makes the point. Take a 100-square-foot primary bath floor. At the Spruce’s ranges, material runs about $500 to $1,000 for ceramic and $1,000 to $1,500 for porcelain. The gap is a few hundred dollars. In a bathroom remodel that gap is small next to the cost of redoing a floor that was not rated for the room. Spend the difference where the tile faces water and wear, and save on the walls.

Bathrooms: floors, showers and walls

Bathrooms are where the absorption number matters most.

Shower floors and wet areas. Porcelain’s low porosity and durability make it a good candidate for showers and bathroom counters. It is our default recommendation for any surface that stays wet.

Bathroom floors. Porcelain handles wet feet, cleaning products and the occasional dropped bottle. If you are planning a larger primary bath with a curbless shower, a continuous porcelain floor that runs from the room into the shower is a clean way to make the space feel bigger and easy to move through.

Walls. Ceramic is suitable for walls and for bathroom floors rated PEI Class 2. PEI is a wear rating, and a lower class means lighter traffic. Ceramic wall tile is a sensible place to save money, and glazed ceramic comes in a wide range of colors and shapes.

Grout matters as much as tile. The tile may be nearly waterproof, but the joints between tiles are where wear and staining show up. If you are choosing for a shower, read our comparison of epoxy grout vs. cement grout before you lock in a finish.

A simple split for most primary baths:

  1. Porcelain on the floor and shower floor.
  2. Porcelain or ceramic on the shower walls, depending on the look and budget.
  3. Ceramic on a feature wall or behind a freestanding tub, where it is not underfoot.

Kitchens: floors, backsplashes and the tile vs. hardwood question

Backsplashes. Ceramic is a common, useful choice for kitchen backsplashes. It is not walked on, it is easier to cut around outlets and windows, and it keeps the budget in check. A glazed ceramic backsplash against a quartz or quartzite counter is a classic pairing. If you are still choosing the counter, we compared the options in quartzite vs. quartz countertops.

Glazed ceramic backsplash above a quartz counter

Floors. In a kitchen, porcelain is the stronger tile choice. It stands up to dropped pots, chair legs and constant traffic, and porcelain designs can imitate concrete, wood and stone. That means you can get a wood look with a tile’s moisture tolerance.

Tile or hardwood in the kitchen? Both are good floors, and the choice comes down to how you live in the room.

Tile (porcelain) Hardwood
Spills and moisture Resists moisture and stains Solid hardwood expands and contracts with humidity
Wear Resists scratches and dents Can be refinished
Feel Hard and cool underfoot Warm, with some give
Dropped dishes Hard surface can break them Often kinder to dishes
Cracking Can crack under a heavy impact Not a cracking material

The table draws on Consumer Reports’ flooring guide, which notes that tile resists wear, moisture, scratches, dents and stains but can crack, while solid hardwood adds warmth and can be refinished but moves with humidity and is not suited to damp areas.

If you want the look of wood in a kitchen that sees real water, two routes work well: wood-look porcelain, or engineered hardwood, which is built to handle humidity changes better than solid planks. Our guide to engineered vs. solid hardwood walks through that decision. Many of our kitchens use one floor that runs through the open living areas, so the choice often depends on the whole house rather than the kitchen alone.

Installation: the part that decides how the tile looks

Tile is only as good as what is under it. Tile is adhered with thinset and the joints are grouted, and the subfloor needs to be smooth and stable first. Here is what to plan for:

  1. Subfloor prep. Uneven or flexing floors lead to cracked tile and grout. Leveling comes before any tile goes down.
  2. Setting material. Porcelain’s density means it is worth checking the manufacturer’s guidance on setting materials.
  3. Cutting. Porcelain often calls for a wet saw or specialty cutting tools, while ceramic cuts more easily.
  4. Layout. Where the tile starts, how the seams land, and how it meets the shower, the vanity and the cabinets all affect how finished the room looks.
  5. Grout. Joint width and grout type affect cleaning and appearance for years.

Consumer Reports says tile installation can be challenging and recommends hiring a professional if you are not experienced at laying tile. Our flooring installation covers tile along with hardwood, engineered hardwood, LVP, laminate and carpet, and it is part of larger kitchen, bath and whole-home projects.

Seeing the tile before you buy it

Most people who start a tile search arrive with a folder of samples and saved photos. The trouble is that a 4-inch sample does not show how a floor, shower wall, vanity and cabinet finish work together. That is the problem our process is built to solve. We measure the room, build it to scale in 3D, and render your real selections photorealistically before anything is ordered. You can compare porcelain against ceramic, a lighter grout against a darker one, or a wood-look floor against a stone-look floor, on screen, while changing your mind still costs nothing.

If you want to see finished rooms first, our remodeling gallery shows completed Sacramento-area work.

Planning a kitchen or bath around your tile

If you are choosing tile as part of a remodel, our design-build team handles the design, material selection and construction as one accountable team, from the first measurement to the final walkthrough. For bathrooms, that includes the floor and shower layout, the vanity and the storage. For kitchens, it covers the cabinetry, the backsplash and the floor, designed together.

Cali Craft Renovations

Start with our bathroom remodeling or kitchen remodeling page, or tell us about a larger project through our whole-home renovations page. If you already have an installer, we also supply flooring materials, with installation optional. See the flooring page for details.

Our view on choosing tile

We came up through the Sacramento trades, and we have seen the same tile mistake many times: the material gets chosen before anyone has worked out how the room will be used. A tile can be perfect in a showroom and wrong on a shower floor, or right for the floor and wrong for the wall.

Our approach is to decide tile after the layout, not before. Where does water land? Where do people walk barefoot? Where will a vanity door swing over the floor? Once the room is drawn to scale, those questions have answers, and the tile follows.

That is also why we render the room with your real selections. Porcelain and ceramic can look nearly the same in a sample, but they behave differently once they meet a shower, a family and twenty years of use. Seeing it first lets you choose with confidence, and one team carrying the design through to the build means the plan you approved is the room you get.

Connor Cline

FAQ

Which is better, porcelain or ceramic tile?

Neither is better everywhere. Porcelain is the better pick for floors, showers and heavy-use areas because it is denser and absorbs 0.5% of its weight in water or less. Ceramic is a good fit for walls and backsplashes, where it costs less and cuts more easily.

Is porcelain tile waterproof?

Porcelain’s absorption rate of 0.5% or less makes it highly moisture resistant, which is why it suits showers and wet floors. The tile is only one part of a watertight installation. Grout, setting materials and shower waterproofing all matter, so the whole assembly needs to be planned together.

Is porcelain tile more expensive than ceramic?

Usually, but not always. The Spruce lists about $5 to $10 per square foot for ceramic and $10 to $15 for porcelain, and the ranges overlap. Porcelain can also cost more to install because it is harder to cut. Compare the specific tile and the full installed cost, not just the sticker price.

Can I use ceramic tile on a bathroom floor?

Yes, if it is rated for floors. Ceramic suits bathroom floors at the PEI Class 2 rating, according to HGTV’s tile guide. For a primary bath with a walk-in shower, we usually lean toward porcelain on the floor and shower floor for its lower absorption and higher durability.

Is tile or hardwood better for a kitchen floor?

Tile resists moisture, scratches and stains, while hardwood is warmer underfoot and can be refinished. If you want wood in a kitchen, engineered hardwood or wood-look porcelain are both worth a look, since solid hardwood moves with humidity. Rendering both in your own kitchen makes the decision much easier.

Sources